Description
After stripping the floor, you can use floor Sealer to shine up your floor. Ideal for high use floors.
Preparation and coating: Clean floor thoroughly with FLOOR STRIPPER, rinse and allow to dry. Apply three coats of HI-SHINE with even pulling strokes of “lamb’s wool applicator”. Allow 20-30 minutes drying time between each coat. New floors may require one extra coat for initial sealing. MAINTENANCE: Remove surface dirt and grime by wet mopping. Use Spray Buff on heavy traffic areas. Spray a fine mist on a small area in front of machine and buff immediately. STRIPPING: Scrub with floor stripper, rinse thoroughly and allow to dry. Then recoat as per instructions. Thorough stripping will ensure good results when recoating. Coverage 50-80 squared meters per 25 litre. Not for unsealed wooden surfaces.
